Users Guide

Broadcom BT-FC-UG128-100
97
Emulex Boot for the Fibre Channel Protocol User Guide
Figure 67: NVMe over FC Boot Popup
5. Make your selection, press Enter.
The utility displays the new NVMe over FC Boot setting (Figure 66).
6. Save the changes with Commit Changes.
6.15.2 Adding an NVMe over FC Boot Device
To add an NVMe over FC Boot device, perform the following steps:
1. From the adapter list (Figure 31), select the adapter to which you want to add an NVMe over FC boot device and press
Enter.
2. From the main configuration menu (Figure 32), select Emulex NVMe over FC Boot Settings. Press Enter.
The Emulex NVMe over FC Boot Settings window appears (Figure 66).
3. Select Add NVMe over FC Boot Device and press Enter.
The Discovered NVMe over FC Controller List window is displayed.