Emulex® CIM Provider Package for LightPulse® Adapters Installation Guide Release 12.
Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, the A logo, Emulex, LightPulse, and OneCommand are among the trademarks of Broadcom and/or its affiliates in the United States, certain other countries, and/ or the EU. Copyright © 2011–2018 Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. For more information, please visit www.broadcom.com.
Emulex CIM Provider Package for LightPulse Adapters Installation Guide Table of Contents Chapter 1: Introduction ...................................................................................................................... 4 1.1 Supported Platforms.................................................................................................................................................4 1.2 Supported CIM Provider Profiles .......................................................................
Emulex CIM Provider Package for LightPulse Adapters Installation Guide Chapter 1: Introduction The Emulex® Common Information Model (CIM) provider enables comprehensive management of Emulex HBAs. It uses an industry-standard API, Common Manageability Programming Interface (CMPI) v2.0, to manage various Emulex adapters.
Emulex CIM Provider Package for LightPulse Adapters Installation Guide Software Update DMTF DSP1025 Record Log DMTF DSP1010 Software SNIA 1.2.0 Access Points SNIA 1.3.0 PCI Device DMTF1.0.0 Physical Asset Profile DMTF DSP1011 Boot Control DMTF 1.1.0 FC HBA SNIA SMI-S 1.5 Part 6 Clause 5 FC HBA Diagnostic Profile DMTF DSP1104 FC Initiator Ports Profile SNIA SMI-S 1.
Emulex CIM Provider Package for LightPulse Adapters Installation Guide 1.
Emulex CIM Provider Package for LightPulse Adapters Installation Guide Chapter 2: Installing the Emulex CIM Provider The following items must be installed before you can install the Emulex CIM provider.
Emulex CIM Provider Package for LightPulse Adapters Installation Guide The Emulex CIM_SoftwareInstallationServiceCapabilities class has the attribute SupportedURISchemes that identifies the supported URI schemes. To update the firmware, perform these steps: 1. List the CIM_SoftwareInstallationServices in the Emulex namespace. Select the CIM_SoftwareInstallationService specific to the adapter on which the firmware is to be updated.
Emulex CIM Provider Package for LightPulse Adapters Installation Guide 2.2.3 Generating Provider Logs if Listing Them Fails To enable provider logs if listing them fails, perform these steps: 1. Stop the CIMOM. 2. Create a .dmp file. Create a provider log for the Emulex FC provider by creating an emulex_fc_provider.dmp file in the /etc/cim/ emulex location. 3. Manually enter the following two lines (without spaces): 2,5,1 /tmp/providerlogs.txt 4.
Emulex CIM Provider Package for LightPulse Adapters Installation Guide Chapter 3: Troubleshooting The following error message might appear if the CIM hosts are not properly added to the OneCommand Manager application: Unknown or invalid host specified There could be instances in which the drivers, the CIM provider, and the CIM Client on a Windows machine are all properly installed, but the CIM hosts are still not added to the OneCommand Manager application.
