Manual

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
5. Managing Hosts
Setting Driver Parameters for All Adapters in a Host
1195
3. In the driver parameter table, click the Value field of a parameter that you want to
change. The range for the value is displayed. Enter a value in decimal or
hexadecimal format, depending on how the current value is presented. If the value
is in hexadecimal format, it is prefixed by “0x” (for example -”0x2d”).
4. Parameters that can be changed temporarily can only be changed from the
corresponding port. Such parameters are represented with a check-box next to it.
5. Click Apply.