Manual

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
11. Configuring UEFI for Ethernet
Starting the Emulex NIC Configuration Utility
1626
Starting the Emulex NIC Configuration Utility
Depending on the OEM UEFI configuration, the Emulex NIC configuration utility may
appear under different setup menus in the OEM system firmware or BIOS (such as
System Settings > Network).
To start the Emulex NIC configuration utility via the HII:
1. The Network screen shows a list of the adapters in the system. Your list may vary
depending on the installed adapters.
Figure 11-1 Emulex NIC Configuration Utility Network Screen