Manual

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
372
iSCSI Commands
The commands in this section support the iSCSI interface in the OCM CLI.
Note: iSCSI commands are supported only on OneConnect iSCSI ports.
Note: Only OCe14000-series adapters support IPv6 addresses.
The MAC address <MAC_Address> of the iSCSI port must be passed to each command
as the first argument.
Some commands require values to be set in a format similar to: “option_name=value”.
Type the full option name or the abbreviated option name (shown in Table 5-2, Option
Names) and enter the value. The abbreviations are not case sensitive.
AddARPTableEntry
This command adds an ARP table entry.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
AddARPTableEntry <MAC_Address> <Dest_MAC_Address> <Dest_IP_Address>
Table 5-2 Option Names
Option Name Abbreviation Example
Auth au
au=1
DataDigest dd
dd=1
DHCP dh
dh=1
HeaderDigest hd
hd=1
ImmediateData id
id=1
Initiator_Alias ia
ia=”initiator_alias”
Initiator_Name in
in=”initiator_name”
Priority pr
pr=1
VLAN_ENABLED ve
ve=1
VLAN_ID vi
vi=1