Manual

Emulex Drivers for Windows User Manual P010077-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
676
lpfc_mes0256: Start node timer on NPortId: x%x, timeout value:%d
lpfc_mes0260: Stop node timer on NPortId: x%x, SCSIId: x%x
lpfc_mes0262: Node timeout on NPortId: x%x, SCSIId: x%x
Mailbox Log Messages (0310–0326)
lpfc_mes0310: Mailbox command timeout – HBA unresponsive
Description Starting timer for disconnected target with NPort
ID and timeout value.
Severity Information
Log
LOG_ELS verbose
Action No action needed, informational.
Description Discontinuing timer for reconnected target with
NPort ID and SCSI ID.
Severity Information
Log
LOG_ELS verbose
Action No action needed, informational.
Description Disconnected NPort ID, SCSI ID has failed to
reconnect within timeout limit.
Severity Error
Log
LOG_ELS verbose
Action Review system configuration.
Description A Mailbox command was posted to the adapter
and did not complete within 30 seconds. sync - 0:
asynchronous mailbox command is issued 1:
synchronous mailbox command is issued.
Severity Error
Log
LOG_MBOX verbose
Action This error could indicate a software driver or
firmware issue. If no I/O is going through the
adapter, reboot the system. If these issues persist,
report these errors to Technical Support.