Manual

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
948
2543: Mailbox command <vpi> (<mbxCommand>) cannot issue
The mailbox command does not have all of the fields set correctly.
Data: (1) sli_mbox_opcode (2) sli_flag (3) flag
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
2544: Mailbox command <vpi> (<mbxCommand>) cannot issue
The HBA cannot be accessed on the PCI bus.
Data: (1) sli_mbox_opcode (2) sli_flag (3) flag
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
2546: New FCF found index <index> tag <event_tag>
A new FCF has been found.
Data: None
Severity: Error
Log: LOG_DISCOVERY
Action: None required.
2547: Read FCF record failed
Could not read the FCF record from the firmware.
Data: None
Severity: Error
Log: LOG_DISCOVERY
Action: None required.
2548: FCF Table full count <count> tag <event_tag>
The FCF table is full.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2549: FCF disconnected from network index <index> tag <event_tag>
The FCF has disconnected from the network.
Data: None
Severity: Error
Log: LOG_DISCOVERY
Action: None required.
2550: UNREG_FCFI mbxStatus error <u.mb.mbxStatus> HBA state <port_state>.
The UNREG_FCFI mailbox command has failed.
Data: None
Severity: Error
Log: LOG_DISCOVERY. LOG_MBOX
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)