Users Guide
Table Of Contents
- Table of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Configuration
- 3.1 ESXi Command Line Tool Transition
- 3.2 FC Driver Configuration
- 3.2.1 FC Driver Parameters Configuration Methods
- 3.2.2 FC-SP-2 Authentication (DHCHAP) Support
- 3.2.3 Trunking Support
- 3.2.4 Dynamically Adding LUNs
- 3.2.5 Dynamically Adding Targets
- 3.2.6 FC Driver Configuration Parameters
- 3.2.7 Creating an FC Remote Boot Disk
- 3.2.8 Managing Devices through the CIM Interface
- 3.2.9 Installing the Emulex CIM Provider
- 3.2.10 Creating, Deleting, and Displaying vPorts
- 3.2.11 Configuring VVols in ESXi 6.5 and 6.7
- Chapter 4: Troubleshooting
- Appendix A: esxcli Management Tool
- Appendix B: lpfc Driver BlockGuard Functionality
- Appendix C: Using the VMID Feature on a Brocade Switch
- Appendix D: Using the VMID Feature on a Cisco Switch
- Appendix E: License Notices
Broadcom DRVVM-LPe-UG124-100
46
Emulex Drivers for VMware ESXi User Guide
An output similar to the following is shown:
------------------------------------------------------------
Displaying results for Fabric
------------------------------------------------------------
N_Port ID : 7e1200
Entity Name :
Entity ID (ASCII) : 52 e1 b0 6f 8c 5f 66 6a-79 c3 a9 f6 32 4d 19 20
Entity ID (Hex) :
0x35322065312062302036662038632035662036362036612d37392063332061392066362033322034642031392032300
0
Application ID : 0x00000209h (521)
-------------------------------------------------------------
Application Server displays 1 entries