Users Guide

Table Of Contents
Broadcom DRVVM-LPe-UG124-100
48
Emulex Drivers for VMware ESXi User Guide
An output similar to the following is shown:
--------------------------------------------------------------------------------------------
INTERFACE VSAN FCID PORT NAME NODE NAME FLAGS
--------------------------------------------------------------------------------------------
fc3/4 102 0x010025 10:00:00:00:c9:d1:a4:ec 20:00:00:00:c9:d1:a4:ec PM
fc3/9 102 0x010045 10:00:e0:07:1b:ce:58:62 20:00:e0:07:1b:ce:58:62 P
Total number of flogi = 2.
FLAGS:
A area FCID allocation
L loop device
V FDISC
D the wwn matches the default OUI list
O the wwn matches the configured OUI list
P allocation was done based on the persistency table
M indicates a VMID capable FCID
On the Cisco switch you can run the following command to get the mapping between FCID and the VMID:
(config-if)# show vmis database
An output similar to the following is shown:
Total 1 entries
-----------------------------------------------------------------------------
INTERFACE VSAN FCID LOCAL VEID GLOBAL VEID
-----------------------------------------------------------------------------
fc3/4 102 0x010025 0x01 50072573-386e-296a-0c27-4f3a4c3c88ea