Deployment Guide

Express
1. From the top menu, select Actions > Configure Certificates.
2. When the Configuration Wizard launches, select Express and click Next. The information from the self-signed certificate
that was created when installing the Security Management Server is used, if available.
3. From the top menu, select Configuration > Save. If prompted, confirm the save.
Certificate setup is complete. The rest of this section details the Advanced method of creating a certificate.
Advanced
There are two paths to create a certificate - Generate Self-Signed Certificate and Use Current Settings. Choose one path:
● Path 1 - Generate Self-Signed Certificate
● Path 2 - Use Current Settings
Path 1 - Generate Self-Signed Certificate
1. From the top menu, select Actions > Configure Certificates.
2. When the Configuration Wizard launches, select Advanced and click Next.
3. Select Generate Self-Signed Certificate and click Next. The information from the self-signed certificate that was created
when installing the Security Management Server is used, if available.
4. From the top menu, select Configuration > Save. If prompted, confirm the save.
Certificate setup is complete. The rest of this section details the other method of creating a certificate.
Path 2 - Use Current Settings
1. From the top menu, select Actions > Configure Certificates.
2. When the Configuration Wizard launches, select Advanced and click Next.
3. Select Use Current Settings and click Next.
4. At the Compatibility Server SSL Certificate window, select Generate Self-Signed Certificate and click Next. The
information from the self-signed certificate that was created when installing the Security Management Serveris used, if
available.
Click Next.
5. At the Core Server SSL Certificate window, select one of the following:
● Select Certificate - Select this option to use an existing certificate. Click Next.
Browse to the location of the existing certificate, enter the password that is associated with the existing certificate, and
click Next.
Click Finish when complete.
● Generate Self-Signed Certificate - The information from the self-signed certificate that was created when installing the
Security Management Server is used, if available. If you select this option, the Message Security Certificate window does
not display (the window does display if you select option Use Current Settings) and the certificate that is created for the
Dell Compatibility Server is used.
Verify that the fully qualified computer name is correct. Click Next.
A warning message displays, telling you that a certificate by the same name already exists. When asked if you would like
to use it, click Yes.
Click Finish when complete.
● Use Current Settings - Select this option to change a setting on a certificate anytime after the initial configuration of the
Security Management Server. Selecting this option leaves your already configured certificate in place. Selecting this
option advances you to the Message Security Certificate window.
At the Message Security Certificate, select one of the following:
○ Select Certificate - Select this option to use an existing certificate. Click Next.
Browse to the location of the existing certificate, enter the password that is associated with the existing certificate,
and click Next.
76
Post-Installation Configuration