Reference Guide

Manage Policies
224
Client Firewall Off
On
Off
Toggle to ON to enable Client Firewall. If toggled to OFF, no
Client Firewall Settings or Rules will be applied.
Client firewall is a stateful firewall.
Settings and Rules
See Client Firewall Settings and Rules.
Debug Logging for
Client Firewall
Not Selected
Selected
Not Selected
A Selected value enables verbose logging of Firewall activity.
See basic settings
Client Firewall Settings and Rules
In the Client Firewall policy, Settings and Rules, click View/Edit.
In the Settings window, you can set Client Firewall Options and Client Firewall Rules
.
Return to Client Firewall Policies
Client Firewall Options
Setting
UI Control
Description
Protection Options
Allow traffic for unsupported protocols
Check box
Allows all traffic that uses unsupported
protocols. When disabled, all traffic using
unsupported protocols is blocked.
Allow only outgoing traffic until firewall
services have started
Check box
Allows outgoing traffic but no incoming
traffic until the Firewall service starts.
If this option disabled, Firewall allows all
traffic before services are started.
Allow bridged traffic
Check box
Allows traffic with a local MAC address.
The MAC address
is an address in the list of
VMs that Firewall supports, not the local
system's MAC address. Use this option to
allow traffic through a bridged environment
with virtual machines.
Enable IP spoof protection
Check box
Blocks network traffic from non
-local host IP
addresses or from local processes that
attempt to spoof their IP address.
Enable firewall intrusion alerts
Check box
Displays alerts automatically when Firewall
detects a potential attack.
Setting
UI Control
Description
Tuning Options
Enable Adaptive mode Check box
Creates rules automatically to allow traffic.
NOTE:
Enable this option temporarily while
tuning a deployment.