Users Guide

3
EVO:RAIL Networking
To ensure the correct functioning of EVO:RAIL
™
and an optimal end-to-end user experience,
understanding the recommendations and requirements are document in this User’s Guide.
EVO:RAIL Appliance
EVO:RAIL consists of four nodes. Figure 1 shows an example of the physical appliance and simple
network setup.
EVO:RAIL ships with either eight RJ-45 or SFP+ NIC ports. Eight corresponding ports are required for
each EVO:RAIL appliance on the TOR switch(es). One port, either on the TOR switch or on a
management VLAN that can reach the TOR network, is required for a workstation or laptop with a web
browser for EVO:RAIL Configuration and Management. Any other ports on the appliance are covered and
disabled.
Figure 1. Rear view of one deployment of EVO:RAIL connected to one TOR switch. Appliance port locations
vary by Qualified EVO:RAIL Partner.
10