Users Guide

separation. Although you could use four additional ports on your TOR 10 GbE switch (if the TOR supports

your BMC ports), it is more economical to use a lower bandwidth switch.

When EVO:RAIL is shipped, the BMC ports are preconfigured by DHCP. The <ApplianceID> can be found

on a pull-out tag located in front of the physical appliance. The default properties are as follows:

BMC interface node 1: hostname = <ApplianceID>-01

BMC interface node 2: hostname = <ApplianceID>-02

BMC interface node 3: hostname = <ApplianceID>-03

BMC interface node 4: hostname = <ApplianceID>-04

The default username and password are:

Username: root Password: root

You can modify the BMC interface IP address and login or password. For more information, see Dell

PowerEdge C6220 II Systems Hardware Owner’s Manual at dell.com/poweredgemanuals.

Table 17. Network configuration table

Network Configuration

Table4 Row 33

If you want to change the default BMC interface values, enter the

username, password, hostnames and/or IP addresses.

4 Each EVO:RAIL appliance

node

Then configure any changes on each node per hardware manufacturer

instructions.