Users Guide

EVO:RAIL Deployment

To deploying the EVO:RAIL:

1. Rack and cable: connect the 10 GbE adapters on EVO:RAIL to your TOR switch(es).

2. Turn on each node on your EVO:RAIL appliance.

3. Connect a workstation or laptop (any operating system) to the TOR switch and configure the

network address to talk to EVO:RAIL or vCenter Server.

For example: IP address: 192.168.10.210; netmask: 255.255.255.0; gateway: 192.168.10.254

4. Browse to the EVO:RAIL IP address (for example, https://192.168.10.200:7443). If you see a browser

message about certificates, click Proceed anyway . The latest versions of Firefox, Chrome, and

Internet Explorer 10 and later are all supported. The minimum recommended screen resolution is

1280x1024.

Figure 4. Initial user interface