Users Guide

NETWORK SERVICES VLAN ID IP

ADDRESS

VM NETWORK

NAME

NETMASK GATE WAY

Active Directory

NETWORK

OUT-OF-BAND MANAGEMENT

VLAN ID IP

ADDRESS

HOSTNAME or

NAMINGSCHE

NETMASK GATE WAY

BMC node 1

BMC node 2

BMC node 3

BMC node 4

EVO:RAIL default configuration table

Default values are used in Just Go! configuration, and are used to prepopulate fields in Customize Me!

configuration. The values are stored in the default configuration file that is a part of the EVO:RAIL

distribution, default-config-static.json.

The following Network Configuration table provides the default Dell EVO:RAIL configuration. The

resources are allocated for one EVO:RAIL appliance.

• You reserve four IP addresses for ESXi, Virtual SAN, and vSphere vMotion.

• The naming scheme for the ESXi hosts is: prefix=host, separator=None, iterator=Num0X, top-level

domain=local. Thus, the host server names are from host01.local through host04.local.

• You use five VLANs: 20, 30, 110, 120, and a VLAN configured as a native VLAN. Configure VLANs on

the TOR switches before configuring EVO:RAIL.

• Logging is configured to “vCenter Log Insight” with IP address 192.168.10.201. DNS server is not

configured, so vCenter Server provides DNS service.

• For example, EVO:RAIL client workstation or laptop configures the customer with 192.168.10.210

(netmask: 255.255.255.0, gateway: 192.168.10.254)