Users Guide

Figure 6. Validating VM Can Reach gateway Configured on Dell Networking ToR Switches

5. Console, telnet, or SSH into the second ToR switch in the pair; This switch is receiving the SAN traffic

since VMNIC1 (connecting to Dell networking TOR switch) is active and VMNIC0 (connecting to Dell

networking TOR switch) is standby for the VSAN port group as discussed earlier. Verify that IGMP

snooping is working with the show ip igmp snooping groups command.

NOTE: The switch with the lowest IP address on the respective VSAN VLAN is elected the IGMP

snooping Querier per configuration; this can be verified with the show ip igmp snooping

interface vlan 1001

command.

Figure 7. Validating multicast and IGMP Snooping

6. Go to Home → Hosts and Clusters VMware vCenter Server Appliance. Click Summary, and then

click the View all two IP addresses link. The screenshot here indicates a sample output.

NOTE: The IPv6 link-local address starting with fe80.