Administrator Guide

18 Configuring Remote Wake-Up Using Dell Client Command Suite
When Deep Sleep Control is enabled in S4 and S5 –
Behavior of Wake on LAN when Deep Sleep Control is enabled in and S4 and S5
Power State
Deep Sleep
Control
BIOS Wake
on LAN
Driver Wake
on LAN
Wake on LAN
Result
S3
Enabled in
S4 and S5
Enabled
Enabled
Yes
S3 (Hybrid)
Yes
S4
No
S5
No
S3
Disabled
No
S3 (Hybrid)
No
S4
No
S5
No
S3
Disabled
Enabled
Yes
S3 (Hybrid)
Yes
S4
No
S5
No
S3
Disabled
No
S3 (Hybrid)
No
S4
No
S5
No
3.1 Using Dell Command | Configure
Dell Command | Configure provides wakeonlan option to configure this feature and supports the following
values:
 disable – To disable the ‘Wake on LAN/WLAN’ feature.
 enable – To select the ‘LAN Only’ bios value.
 enablewakeonwlan – To select the ‘WLAN Only’ bios value
 lanorwlan – to select the ‘LAN or WLAN’ bios value
 lanwithpxeboot – to select ‘LAN With PXE Boot’ bios value
3.1.1 Using Command Line
The following figure illustrates the command for setting the wakeonlan option as lanorwlan.