White Papers

32 Version 1.0.0a
No standard messages are defined.
Invoking the RequestStateChange(
) method multiple times could result in earlier requests being
overwritten or lost.
Table 11 – CIM_USBRedirectionSAP.RequestStateChange(
) Method: Return Code Values
Value Description
0 Request was successfully executed.
1 Method is unsupported.
2 Error occurred.
4096 Job started: REF returned to started CIM_ConcreteJob.
Table 12 – CIM_USBRedirectionSAP.RequestStateChange( ) Method: Parameters
Qualifiers Name Type Description/Values
IN RequestedState uint16 Valid state values:
2 (Enabled) – activate Virtual Media
Session
3 (Disabled) – disconnect Virtual Media
Session
6 (Offline) – ready to activate Virtual Media
Session
IN TimeoutPeriod datetime
Client-specified maximum amount of time
the transition to a new state is supposed to
take:
0 or NULL – No time requirements
<interval> – Maximum time allowed
OUT Job CIM_ConcreteJob REF Returned if job started
8.6.1 CIM_USBRedirectionSAP.RequestStateChange( )—Conditional Support
When an instance of CIM_EnabledLogicalElementCapabilities is associated with the
CIM_USBRedirectionSAP instance and the
CIM_EnabledLogicalElementCapabilities.RequestedStatesSupported property contains at least one
value, the CIM_USBRedirectionSAP.RequestStateChange(
) method shall be implemented and
supported. The CIM_USBRedirectionSAP.RequestStateChange(
) method shall not return a value of
1 (Not Supported).
8.7 Profile Conventions for Operations
Support for operations for each profile class (including associations) is specified in the following
subclauses. Each subclause includes either the statement “All operations in the default list in clause 8.7
are supp
orted as described by DSP0200 version 1.2
or a table listing all of the operations that are not
supported by this profile or where the profile requires behavior other than that described by
DSP0200 version 1.2
.
The default list of operations is as follows:
• GetInstance
• Associators
• AssociatorNames