White Papers

Version 1.0.2 27
This section describes the implementation for the DCIM_BIOSService class that represents the BIOS and
boot management service.
This class shall be instantiated in the Implementation Namespace.
The DCIM_LCElementConformsToProfile association(s) shall reference the DCIM_BIOSService
instance(s).
7.3.1.1 WBEM URIs for WinRM
®
The class WBEM URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-
schema/2/DCIM_BIOSService?__cimnamespace=<Implementation Namespace>”
The key properties shall be SystemCreationClassName, CreationClassName, SystemName and Name.
The instance WBEM URI for DCIM_BIOSService instance shall be:
“http://schemas.dell.com/wbem/wscim/1/cim-
schema/2/DCIM_BIOSService?__cimnamespace=<Implementation
Namespace>+
SystemCreationClassName=DCIM_ComputerSystem+CreationClassName=DCIM_BIOSService+
SystemName=DCIM:ComputerSystem+Name=DCIM:BIOSService
”
7.3.1.2 Operations
The following table details the implemented operations on DCIM_BIOSService.
Table 17 – DCIM_BIOSService – Operations
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
Invoke
Mandatory
Instance URI
7.3.1.3 Properties
The following table details the implemented properties for DCIM_BIOSService instance representing a
system in a system. The “Requirements” column shall denote the implementation requirement for the
corresponding property. If the column “Property Name” matches the property name, the property either
shall have the value denoted in the corresponding column “Additional Requirement”, or shall be
implemented according to the requirements in the corresponding column “Additional Requirement”.