White Papers

Version 1.0.2 35
Table 31 – ChangeBootOrderByInstanceID() Method: Return Code Values
Value Description
0 Completed with no error
1 Not supported
2 Failed
4096 Job Created
Table 32 – ChangeBootOrderByInstanceID() Method: Parameters
Qualifiers Name Type Description/Values
IN, REQ source[] String
Shall contain the InstanceID value(s) for
DCIM_BootSourceSetting instances to change the order
of.
OUT Job
CIM_Concrete
Job REF
Reference to the newly created pending value application
job.
OUT MessageID String Error MessageID
OUT Message String Error Message
OUT MessageArguments[] String Error MessageArguments
9 Use Cases
This section contains use cases for the Dell BIOS and Boot Profile.
Note that URIs in this section are in form of WBEM URIs for WinRM
®
.
9.1 Discovery of BIOS and Boot profile support
Use one of the two procedures below to confirm the existence of BIOS and Boot profile support
A) GET the DCIM_LCRegisteredProfile instance using an InstanceID of
DCIM:BIOSandBootManagement:1.0.0. See section 3.14 for a definition of
GET.
Instance URI:
http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/DCIM_LCRegisteredProfile?__cimnamespace=root/interop+InstanceID=DCIM:BIOSan
dBootManagement:1.0.0
Results for the InstanceID of DCIM:BIOSandBootManagement:1.0.0 shown below. If no instance
is returned, the profile is not supported.
DCIM_LCRegisteredProfile
AdvertiseTypeDescriptions = WS-Identify, Interop Namespace
AdvertiseTypes = 1, 1
InstanceID = DCIM:BIOSandBootManagement:1.0.0
OtherRegisteredOrganization = DCIM
RegisteredName = BIOS and Boot Management