White Papers

Version 1.1.0 13
Table 4 – Class: DCIM_BIOSEnumeration 173
Properties
Notes
Additional Requirements
InstanceID
Mandatory
The property value shall be formed as follows:
“BIOS.Setup.1-1:<AttributeName property value>”.
AttributeName
Mandatory
The property value shall be from the “AttributeName”
column in Table 5
CurrentValue
Mandatory
The property value shall be one of the values in the
“PossibleValues” column at the corresponding row in
Table 5.
PendingValue
Mandatory
The property value shall be one of the values in the
“PossibleValues” column at the corresponding row in
Table 5.
IsReadOnly
Mandatory
The property value shall be the value in the “IsReadOnly”
column at the corresponding row in Table 5.
FQDD
Mandatory
The property shall be set to “BIOS.Setup.1-1”.
PossibleValues
Mandatory
The property value shall be equal to the array of the
values in “PossibleValues” column at the corresponding
row in Table 5.
174
The following table describes the requirements for the AttributeName, and PossibleValues properties. 175
The PossibleValues is an array property represented in the table as comma delimited list. 176
NOTE: The BIOS attributes listed below may not be present on all Dell systems. The presence of a particular 177
attribute depends on the model of a Dell system, the features available in the system and the BIOS version of the 178
system. 179
Table 5 – DCIM_BIOSEnumeration Attributes 180
AttributeName
Attribute Description
IsReadOnly
PossibleValues
MemTest
When set to enabled, the
memory tests are
performed
FALSE
Enabled, Disabled
RedundantMem
Feature
Dependant
1
Disabled, Spare, Mirror,
IntraNodeMirror, DimmSpare
MemOpMode
Memory operating mode
Feature
Dependant
1
OptimizerMode, AdvEccMode,
SpareMode, MirrorMode
MemOptimizer
Memory Optimizer
Technology
Feature
Dependant
1
Enabled, Disabled
SnoopFilter
Snoop Filter
FALSE
Enabled, Disabled
NodeInterleave
If the system is configured
with matching memory,
this field enables node
interleaving. If set to
Disabled (the default), the
system supports Non-
Uniform Memory
architecture (NUMA)
(asymmetric) memory
configurations. This field is
active only if the memory
configuration can support
node interleaving.
Feature
Dependant
1
Enabled, Disabled