White Papers

Version 1.1.0 21
schema/2/DCIM_BIOSInteger?__cimnamespace=<Implementation Namespace>+InstanceID= 245
BIOS.Setup.1-1:AttributeName (AttributeName comes from Table 5)” 246
7.1.3.2 Operations 247
The following table details the implemented operations on DCIM_BIOSInteger. 248
Table 9 – DCIM_BIOSInteger - Operations 249
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
DCIM_BIOSService.SetAttribute()
Mandatory
See section 8.1
DCIM_BIOSService.SetAttributes()
Mandatory
See section 8.2
250
7.1.3.3 Properties 251
The following table details the implemented properties for DCIM_BIOSInteger instance representing a 252
BIOS integer attribute. The “Requirements” column shall denote the implementation requirement for the 253
corresponding property. If the column “Property Name” matches the property name, the property either 254
shall have the value denoted in the corresponding column “Additional Requirement”, or shall be 255
implemented according to the requirements in the corresponding column “Additional Requirement”. 256
Table 10 – Class: DCIM_BIOSInteger 257
Properties
Notes
Additional Requirements
InstanceID
Mandatory
The property value shall be formed as follows:
“BIOS.Setup.1-1:<AttributeName property value>”.
AttributeName
Mandatory
The property value shall be from the “AttributeName”
column in Table 811.
CurrentValue
Mandatory
The property value shall match the format described in
“Value Expression” column at the corresponding row in
Table 8.
PendingValue
Mandatory
The property value shall match the format described in
“Value Expression” column at the corresponding row in
Table 8.
IsReadOnly
Mandatory
The property value shall be the value in the “IsReadOnly”
column at the corresponding row in Table 8.
FQDD
Mandatory
The property shall be set to “BIOS.Setup.1-1”.
LowerBound
Mandatory
The property value shall be the value in the “LowerBound”
column at the corresponding row in Table 8.
UpperBound
Mandatory
The property value shall be the value in the “UpperBound”
column at the corresponding row in Table 8.
258
The following table describes possible DCIM_BIOSInteger attributes and the requirements for the 259
AttributeName, IsReadOnly, LowerBound, and UpperBound properties. 260
NOTE: The BIOS attributes listed below may not be present on all Dell systems. The presence of a particular 261
attribute depends on the model of a Dell system, the features available in the system and the BIOS version of the 262
system. 263