White Papers

Version 1.1.0 27
Table 16 – Class: DCIM_BootSourceSetting 340
Properties and Methods
Requirement
Description
InstanceID
Mandatory
The property value shall have prefix from Table 12
“DCIM_BootSourceSetting.InstanceID” column
followed by a unique id representing the boot
source.
For example:
UEFI:Disk.USBFront.2-
1:3156051d1529b8f4f88c99f54b895350 (boot source
belongs to UEFI bootlist)
IPL:NIC.Slot.4-
2:d0f2c6c736adb8c2238153293a0c026c (boot source
belongs to IPL bootlist)
BCV:RAID.Integrated.1-
1:b84a10539d2ccaca5e86b7de3cae08a8 (boot source
belongs to BCV bootlist)
BIOSBootString
Mandatory
Descriptive boot source name
BootString
Mandatory
Descriptive boot source name
PendingAssignedSequence
Mandatory
The value shall be set through the successful execution
of the ChangeBootOrderByInstanceID() method,
indicates the Pending Assigned Sequence of this
instance.
CurrentAssignedSequence
Mandatory
The CurrentAssignedSequence attribute of this
instance defines the its place in the zero based
indexed boot sequence.
PendingEnabledStatus
Mandatory
The value shall be set through the successful execution
of the ChangeBootSourceState () method, indicates
the Pending Enabled Status of this instance.
CurrentEnabledStatus
Mandatory
The CurrentEnabledStatus attribute of this
instance identifies whether it is enabled or
disabled, if disabled this boot source will not be
attempted for boot while booting from the bootlist.
ElementName
Mandatory
FailThroughSupported
Mandatory
An enumeration indicating the behavior when the
attempt to boot using the boot source fails (no media,
timeout).
The current values in the enumeration are:
0 = Unknown
1 = Is Supported
2 = Is Not Supported
A value of 1 (Is Supported) indicates that next boot
source the boot order is used.
A value of 2 (Is Not Supported) indicates that the boot
order is terminated and no other boot sources are
used.
7.3 Service for Method Invocations 341
7.3.1 DCIM_BIOSService 342