White Papers

Active Directory® Client Profile
Version 2.0.0a 13
7.5.1 RequestedState – 12 (Not Applicable) value
When Active Directory client state management is not supported, the value of the
DCIM_OEMActiveDirectoryService.RequestedState property shall be 12 (Not Applicable).
7.5.2 RequestedState – 5 (No Change) value
When Active Directory client state management is supported, the initial value of the
DCIM_OEMActiveDirectoryService.RequestedState property shall be 5 (No Change).
7.6 DCIM_OEMActive
relates the value te property to the state of
Active Direc t. The DC te property shall match the
lues that are s n Table xecutes but does not
mplete succe Act
ctiveDirecto rvic
value of this property may also change as a result of a change to the Active Directory client enabled state
y non-CIM implementation.
Table 2 – EnabledState Value Description
DirectoryService.EnabledState
Table 2
the
s of the DCIM_OEMActiveDirectoryService.EnabledSta
IM_OEMActiveDirectoryService.EnabledStatory clien
va pecified i 2. When the RequestStateChange(
) method e
co
DCIM_OEMA
ssfully and the
rySe
ive Directory client is in an indeterminate state, the
e.EnabledState property shall have value of 5 (Not Applicable). The
b
Value Description Extended Description
2 Enabled Active Directory authentication shall be enabled.
3 Disabled Active Directory authentication shall be disabled.
5 Not Applicable
Active Directory client state is indeterminate, or the Active Directory cli
state management is not supported.
ent
8 Methods
This section includes requirements for support of the intrinsic operations and extrinsic methods of the CIM
Method: DCIM_OEMActiveDirectoryService.RequestStateChange( )
DCIM_ ange( ) method changes the element’s
te to the valu r.
n values fo tateChange(
) shall be as specified in Table 3 where the method-execution
ior matche -code description. RequestStateChange(
) method parameters are specified
in Table 4.
Tab es
elements defined by this profile.
8.1
Invoking the
sta
OEMActiveDirectoryService.RequestStateCh
e specified in the RequestedState paramete
Retur
behav
r RequestS
s the return
le 3 – DCIM_OEMActiveDirectoryService.RequestStateChange(
) Method: Return Code Valu
Value Des cription
0 Req ecuted. uest was successfully ex
1 Method is not supported in the implementation.
2 E ccurred rror o
4 J096 ob started