White Papers

Version 1.1.0 12
the network share.
“UnpackAndShare” Success Successfully executed the method.
“UnpackAndShare” Failed
Failed to execute the method, refer to
MessageID and Message properties of
the DCIM_OSDConcreteJob instance for
detailed information.
BootToNetworkISO Rebooting to ISO
Attaching the network ISO image as a
local CDROM to the host and booting to
it.
BootToNetworkISO Success Successfully executed the method.
BootToNetworkISO Failed
Failed to execute the method, refer to
MessageID and Message properties of
the DCIM_OSDConcreteJob instance for
detailed information.
BootToISOFromVFlash Rebooting to ISO
Attaching the ISO image on vFlash as a
local CDROM to the host and booting to
it.
BootToISOFromVFlash Success Successfully executed the method.
BootToISOFromVFlash Failed
Failed to execute the method, refer to
MessageID and Message properties of
the DCIM_OSDConcreteJob instance for
detailed information.
DownloadISOToVFlash Downloading
Copying the ISO image from network
share to vFlash.
DownloadISOToVFlash Success Successfully executed the method.
DownloadISOToVFlash Failed
Failed to execute the method, refer to
MessageID and Message properties of
the DCIM_OSDConcreteJob instance for
detailed information.
8 Methods
This section details the requirements for supporting extrinsic methods for the CIM elements defined by
this profile.
8.1 Method: DCIM_OSDeploymentService.GetDriverPackInfo()
The GetDriverPackInfo method returns the list of OSs that can be installed on the server using the
embedded device drivers present in the Lifecycle Controller.
Return values for GetDriverPackInfo() shall be as specified in Table 3 where the method-execution
behavior matches the return-code description. GetDriverPackInfo() method’s parameters are specified in
Table 4 – DCIM_OSDeploymentService.GetDriverPackInfo() Method: Parameters.
Output parameters are Version and OSList.
Table 3 – DCIM_OSDeploymentService.GetDriverPackInfo() Method: Return Code Values
Value Description
0 Request was successfully executed.
1 Method is not supported in the implementation.
2 Error occurred.
4096
Job started: REF returned to started
CIM_ConcreteJob