Developers Guide

Preparing PS Series volumes for import
30 Data Migration from Dell PS Series or PowerVault MD3 to Dell EMC SC Series Storage using Thin Import | 3041-BP-EM
Note: The Dell Storage Client can connect to a Dell Storage Manager Data Collector or connect directly to SC
Series storage. Both options are supported with the Thin Import process. The instructions in this section focus
only on connecting directly to SC Series storage. Using Thin Import with PS Series volumes requires Dell
Storage Client/Dell Storage Manager Data Collector version 2015 R2 or later.
2. Log in to the Dell Storage Client using administrative credentials.
3. Click the Storage tab and navigate to Fault Domains > iSCSI.
4. Select the iSCSI fault domain to be used for the import process.
Note: On systems with more than one iSCSI fault domain, select a fault domain that is configured on the
same network as the PS Series array.
5. Right-click the iSCSI fault domain and select Create Remote Connection.