Developers Guide

Preparing MD3 volumes for import
38 Data Migration from Dell PS Series or PowerVault MD3 to Dell EMC SC Series Storage using Thin Import | 3041-BP-EM
4. Select the iSCSI fault domain to be used for the import process.
Note: On systems with more than one iSCSI fault domain, select a fault domain that is configured on the
same network as the MD3 array.
5. Right-click the iSCSI fault domain and select Create Remote Connection.
6. In the Configure iSCSI Connection window, enter the iSCSI IP address of the first MD3 array
controller (controller 0) and set the iSCSI network type to Gigabit or greater. Click Finish.