Developers Guide

Post-import steps
92 Data Migration from Dell PS Series or PowerVault MD3 to Dell EMC SC Series Storage using Thin Import | 3041-BP-EM
9 Post-import steps
Perform the steps in the section after all PS Series or MD3 volume imports have been completed. Be sure to
review the best practices guides to configure hosts properly: Dell EMC SC Series Storage and Microsoft
Windows Server 2016, Windows Server 2012 R2 Best Practices for Dell Compellent Storage Center, or Dell
EMC SC Series Best Practices with VMware vSphere 5.x-6.x.
9.1 Disconnect the SC Series array from the PS Series or MD3 array
This section details how to disconnect the SC Series array from the PS Series or MD3 array. Perform these
steps after importing Windows Server volumes or VMware volumes.
1. In the Dell Storage Client, right-click the iSCSI fault domain used to remotely connect to the PS
Series or iSCSI-connected MD3 array and select Delete Remote Connection.
2. Verify the address of the PS Series or MD3 array and click Finish.