Release Notes

Installing the MEM with VMware Update Manager
23 Configuring and Installing the PS Series Multipathing Extension Module for VMware vSphere and PS Series | TR1074
5. The Patches and extensions page lists the patches and extensions to be applied. Click Next to
continue.
6. On the Advanced options page, there is the option to schedule the deployment for a future time and
date. Click Next to continue.
7. On the Host remediation options page, there are options for altering the behaviors of the virtual
machines during the install. Refer to the Installing and Administering VMware vSphere Update
Manager from the VMware Documentation site for details. Click Next to continue.
8. On the Ready to complete page, verify that the information is correct, and click Finish. Unless the
task was schedule to run at a later time, it will be immediately executed.
9. As the task is been executed, it will display status updates in the Recent Tasks pane of the vSphere
client. If several host were selected, the task will execute against one host at a time, until the MEM
has been installed on all the selected hosts.
10. Once the task has been completed, the MEM will have been installed or updated on all the hosts
selected.