White Papers
Table Of Contents
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Symbols and Abbreviated Terms
- 5 Synopsis
- 6 Description
- 7 Implementation Description
- 8 Methods
- Table 29 – DCIM_FCService.SetAttribute() Method: Return Code Values
- The SetAttributes() method is used to set or change the values of a group of attributes.
- Table 32 – DCIM_FCService.SetAttributes() Method: Return Code Values
- The CreateTargetedConfigJob() method is used to apply the pending values created by the SetAttribute and SetAttributes methods. The successful execution of this method creates a job for application of pending attribute values.
- CreateTargetedConfigJob method supports the following optional input parameters
- 1. RebootJobType: When provided in the input parameters, creates a specific reboot job to “PowerCycle”, “Graceful Reboot without forced shutdown”, or “Graceful Reboot with forced shutdown”. This parameter only creates the RebootJob and does not schedu...
- 2. ScheduledStartTime: When provided in the input parameters, schedules the “configuration job” and the optional “reboot job” at the specified start time. A special value of “TIME_NOW” schedules the job(s) immediately.
- 3. UntilTime: This parameter has a dependency on “ScheduledStartTime”, together “ScheduledStartTime” and “UntilTime” define a time window for scheduling the job(s). Once scheduled, jobs will be executed within the time window.
- If CreateTargetedConfigJob method is executed without the three optional parameters discussed above, then configuration job is created but not scheduled. However, this configuration job can be scheduled later using the DCIM_JobService.SetupJobQueue ()...
- Table 35 – DCIM_FCService.CreateTargetedConfigJob() Method: Return Code Values
- Table 38 – DCIM_FCService.DeletePendingConfiguration() Method: Return Code Values
- 9 Use Cases
- 10 CIM Elements
- 11 Privilege and License Requirement
Version 1.0.0 27
Table 19 – DCIM_FCEnumeration Fiber Channel Target Configuration
487
AttributeName
Attribute
Description
IsReadOnly
PossibleValues
Description
BootScanSelection
Boot Scan Selection
FALSE
“Disabled”,” FirstLUN”
1
“SpecifiedLUN”
Boot scan
Selection
NOTE:
1
The “FirstLUN” value in the PossibleValues array property shall be present only on the Qlogic
TM
adapters.
488
The following table describes the values for the DCIM_FCInteger of this group. Each of the column
489
headings correspond to a property name on the DCIM_FCInteger class. Each of the rows contain the
490
values for the properties listed in the column headings.
491
Table 20 – DCIM_FCInteger Fiber Channel Target Configuration
492
AttributeName
Attribute Description
IsReadOnly
LowerBound
UpperBound
FirstFCTargetLUN
First FC Target LUN
FALSE
2
0
Vendor Specific
3
SecondFCTargetLUN
Second FC Target LUN
FALSE
2
0
Vendor Specific
3
NOTE:
2
FirstFCTargetLUN and SecondFCTargetLUN attributes shall be read-only and IsReadOnly property shall
493
be set to TRUE, if the BootScanSelection attribute’s CurrentValue property has value “Disabled”.
494
NOTE:
3
The UpperBound property for the FirstFCTargetLUN and SecondFCTargetLUN is specific to the FC card
495
vendor. For example, for Emulex
TM
cards, the value is 255 and for Qlogic
TM
cards, the value is 65535.
496
Table 21 – DCIM_FCString Fiber Channel Target Configuration
497
AttributeName
Attribute Description
IsReadOnly
Min
Length
Max Length
FirstFCTargetWWPN
First FC Target World Wide Port
Name
FALSE
4
23
23
SecondFCTargetWW
PN
Second FC Target World Wide
Port Name
FALSE
4
23
23
NOTE:
4
FirstFCTargetWWPN and SecondFCTargetWWPN attributes shall be read-only and IsReadOnly property
498
shall be set to TRUE, if the BootScanSelection attribute’s CurrentValue property has value “Disabled”.
499
7.7.3 HBA Configuration
500
This section describes the attributes for HBA Configuration.
501
The following table describes the values for the DCIM_FCEnumeration of this group. Each of the column
502
headings correspond to a property name on the DCIM_FCEnumeration class. The Description column
503
contains the description for each of the attribute. Each of the rows contain the values for the properties
504
listed in the column headings. The PossibleValues property is an array property represented in the table
505
as comma delimited list.
506
Table 22 – DCIM_FCEnumeration HBA Configuration
507
AttributeName
Attribute Description
IsReadOnly
PossibleValues
Description