White Papers
Table Of Contents
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Symbols and Abbreviated Terms
- 5 Synopsis
- 6 Description
- 7 Implementation Description
- 8 Methods
- Table 29 – DCIM_FCService.SetAttribute() Method: Return Code Values
- The SetAttributes() method is used to set or change the values of a group of attributes.
- Table 32 – DCIM_FCService.SetAttributes() Method: Return Code Values
- The CreateTargetedConfigJob() method is used to apply the pending values created by the SetAttribute and SetAttributes methods. The successful execution of this method creates a job for application of pending attribute values.
- CreateTargetedConfigJob method supports the following optional input parameters
- 1. RebootJobType: When provided in the input parameters, creates a specific reboot job to “PowerCycle”, “Graceful Reboot without forced shutdown”, or “Graceful Reboot with forced shutdown”. This parameter only creates the RebootJob and does not schedu...
- 2. ScheduledStartTime: When provided in the input parameters, schedules the “configuration job” and the optional “reboot job” at the specified start time. A special value of “TIME_NOW” schedules the job(s) immediately.
- 3. UntilTime: This parameter has a dependency on “ScheduledStartTime”, together “ScheduledStartTime” and “UntilTime” define a time window for scheduling the job(s). Once scheduled, jobs will be executed within the time window.
- If CreateTargetedConfigJob method is executed without the three optional parameters discussed above, then configuration job is created but not scheduled. However, this configuration job can be scheduled later using the DCIM_JobService.SetupJobQueue ()...
- Table 35 – DCIM_FCService.CreateTargetedConfigJob() Method: Return Code Values
- Table 38 – DCIM_FCService.DeletePendingConfiguration() Method: Return Code Values
- 9 Use Cases
- 10 CIM Elements
- 11 Privilege and License Requirement
30 Version 1.0.0
550
Table 26 – Class: DCIM_FCService
551
Properties and Methods
Requirement
Description
SystemCreationClassName
Mandatory
The property value shall be “DCIM_ComputerSystem”.
CreationClassName
Mandatory
The property value shall be “DCIM_FCService”.
ElementName
Mandatory
The property value shall be “FC Service”
SystemName
Mandatory
The property value shall be “DCIM:ComputerSystem”.
Name
Mandatory
The property value shall be “DCIM:FCService”
7.9 Fiber Channel Profile Registration
552
This section describes the implementation for the DCIM_LCRegisteredProfile class.
553
This class shall be instantiated in the Interop Namespace: root/interop.
554
The DCIM_ElementConformsToProfile association(s)’ ConformantStandard property shall reference the
555
DCIM_LCRegisteredProfile instance.
556
7.9.1 Resource URIs for WinRM
®
557
The class Resource URI shall be "http://schemas.dmtf.org/wbem/wscim/1/cim-
558
schema/2/CIM_RegisteredProfile?__cimnamespace=root/interop"
559
The key property shall be the InstanceID property.
560
The instance Resource URI shall be: “http://schemas.dell.com/wbem/wscim/1/cim-
561
schema/2/DCIM_LCRegisteredProfile?__cimnamespace=root/interop+InstanceID=DCIM:FC:1”
562
7.9.2 Operations
563
The following table lists the implemented operations on DCIM_FCView.
564
Table 27 – DCIM_LCRegisteredProfile - Operations
565
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
566
7.9.3 Properties
567
The following table details the implemented properties for DCIM_LCRegisteredProfile instance
568
representing Fiber Channel Profile implementation. The “Requirements” column shall denote whether the
569
property is implemented (for requirement definitions, see section 3). The “Additional Requirements”
570
column shall denote either possible values for the property, or requirements on the value formulation.
571
Table 28 – Class: DCIM_LCRegisteredProfile
572
Properties
Requirement
Type
Description
InstanceID
Mandatory
String
"DCIM:FC:1"
RegisteredName
Mandatory
String
This property shall have a value of
“Fiber Channel”.