White Papers

Version 1.2.0 71
Table 101 – SendTestSNMPTrap() Method: Parameters 1220
Qualifiers Name Type Description/Values
IN, REQ InstanceID String
The property shall have the value of the
InstanceID property of the attribute for which the
test email alert is generated.
OUT MessageID String
Error Message ID may be used to look-up in the
Dell Message registry files. For more information,
see Error Message Registry.
OUT Message String Error Message in English
OUT MessageArguments[] String Substitution variables for dynamic error message.
Table 102 – SendTestSNMPTrap() Method: Standard Messages 1221
MessageID (OUT parameter) Message MessageArguments[]
RAC001 The command was successful
RAC002 General failure
RAC003
Missing required parameter
<parameter>
AttributeName, AttributeValue,
Target
RAC004
Invalid parameter value for
<parameter>
AttributeName, AttributeValue,
Target
RAC005
Mismatch in AttributeName and
AttributeValue count
RAC006
AttributeValue cannot be changed for
ReadOnly Attrinbute Name
RAC007 Input out of range
RAC008 Invalid boolean Value
RAC009 String exceeds maximum length
RAC010 Invalid character value
RAC012
User is not Authorized to perform this
operation
RAC013 Invalid FQDD
RAC014 Invalid Attribute was Entered
RAC015
Not one of the Possible Values for
AttributeName
AttributeName
RAC016 Invalid AttributeName
RAC018 Completed with Errors
RAC020 Completed
RAC021
DHCP is Enabled so cannot set
static values for IPAddress Net mask
or Gateway
RAC022
The User Name is not configured so
cannot Enable the User or set values
for User Password IPMILan
IPMISerial or User Admin Privilege
RAC023
The User Password is not configured
so cannot Enable the User or set
values for IPMILan IPMISerial or
User Admin Privilege
RAC024
VLAN is Disabled so cannot set