White Papers

Version 1.6.0 29
Qualifiers
Name
Type
Description/Values
IN
Gateway
string
An optional parameter for specifying the
iDRAC static IP configuration after the reset
to the factory defaults occurs.
The parameter shall be IPv4 address.
The iDRAC shall be set to this gateway IP
address after the reset of iDRAC
configuration.
NOTE: If this parameter is not specified
then iDRAC shall be set to the value of the
Gateway attribute in the IPv4 Information
group in the iDRAC Card Profile.
IN
DNS
string
An optional parameter for specifying the
iDRAC static IP configuration after the reset
to the factory defaults occurs.
The parameter shall be IPv4 address.
The iDRAC shall be set to this DNS IP
address after the reset of iDRAC
configuration.
NOTE: If this parameter is not specified
then iDRAC shall be set to the value of the
DNS1 attribute in the IPv4 Information group
in the iDRAC Card Profile.
IN
Domain
string
An optional parameter for specifying the
iDRAC static IP configuration after the reset
to the factory defaults occurs.
The iDRAC shall be set to this domain after
the reset of iDRAC configuration.
NOTE: If this parameter is not specified
then iDRAC shall be set to the value of the
DNSDomainName attribute in the NIC
Information group in the iDRAC Card
Profile.
OUT
MessageID
string
Error Message ID may be used to look-up in
the Dell Message registry files. For more
information, see Error Message Registry.
OUT
Message
string
Error Message in English corresponding to
MessageID is returned if the method fails to
execute
OUT
MessageArguments[]
string
Substitution variables for dynamic error
messages
Table 24 – DCIM_LCService.ReInitiateAutoDiscovery() Method: Standard Messages
491
MessageID (OUT parameter)
Message
MessageArguments[]
LC002
General failure
NA
LC004
PS info not formatted correctly
NA