White Papers

Version 1.4.0 25
Table 24 – DCIM_OSDeploymentService.DetachISOImage() Method: Parameters 448
Qualifiers Name Type Description/Values
OUT MessageID String
If the method fails to execute, the error
message ID is returned.
OUT Message String
If the method fails to execute, the error
message in English is returned.
OUT
MessageArguments
[]
String
Substitution variables for dynamic error
messages
Table 25 – DCIM_OSDeploymentService.DetachISOImage() Method: Standard Messages 449
MessageID (OUT parameter) Message MessageArguments[]
OSD7
Unable to retrieve Lifecycle
Controller handle
OSD22
Unable to detach ISO image from
the host
OSD23
Unable to continue with
DetachISOImage - another
command is in the process of
exposing ISO Image and booting to it
OSD32 ISO image is not attached
450
8.7 DCIM_OSDeploymentService.BootToPXE() 451
The BootToPXE() method is used to boot a host system using the PXE mechanism. The following table 452
lists the return values for the BootToPXE() method, where the method-execution behavior matches the 453
return-code description. 454
Table 26 – DCIM_OSDeploymentService.BootToPXE() Method: Return Code Values 455
Value Description
2 Error occurred.
4096
Job started: REF returned to started
CIM_ConcreteJob
The following table lists the output parameters for the BootToPXE() method. 456