White Papers

Version 2.1.0 15
Property Name
Requirements
Type
Additional Requirement
InputPowerUnits
Mandatory
string
This property indicates the
programmatic units for the input power
properties. This property value shall be
in "watts".
RatedMaxOutputPower
Mandatory
uint32
This property indicates the maximum
amount of output (DC) power.
0 shall mean “Unknown”.
TotalOutputPower
Mandatory
uint32
This property represents the total output
power of the PowerSupply in milli watts.
0 shall mean “Unknown”.
RequestedState
Mandatory
uint16
The property value shall be 12 (Not
Applicable).
ActiveInputVoltage
Mandatory
uint16
This property indicates the input voltage
range that is currently in use. The
property value shall be:
• 2 (Unknown),
• 3 (Range1).
EnabledState
Mandatory
uint16
The property value shall be 2 (Enabled).
IsSwitchingSupply
Mandatory
boolean
This property indicates that the Power
Supply is a switching (instead of linear)
supply.This property shall have a value
of "TRUE".
IsACInput
Mandatory
boolean
The property shall indicate whether
power supply is direct current (DC) or
alternating current (AC) powered. A
value of true shall indicate the required
input of the PowerSupply is AC.
IsACOutput
Mandatory
boolean
A value of false shall indicate the output
from the PowerSource is direct current
(DC). This property shall have a value of
"FALSE"
Range1InputVoltageHigh
Mandatory
uint32
The high voltage of Input Voltage Range
1 for this Power Supply. The property
value shall be in Milli Volts
Range1MaxInputPower Mandatory uint32
This property indicates the maximum
amount of power that this Power Supply
may draw. The property value shall be in
Watts.
OperationalStatus[]
Mandatory
uint16
The property value shall be one of the
following:
• 0(Unknown)
• 2(OK)
• 3(Degraded)
• 6 (Error)
PrimaryStatus
Mandatory
uint16
The property value shall be one of the
following:
• 0(Unknown)
• 1(OK)
• 2(Degraded)
• 3 (Error)