White Papers

12 Version 1.0.0
Element Name Requirement Description
DCIM_LCElementConformsToPro
file
Mandatory
The class shall be implemented in both the Interop and
Implementation Namespaces.
See section
DCIM_LCRegisteredProfile
Mandatory
The class shall be implemented in the Interop
Namespace.
See section
Indications
None defined in this profile
125
7.1 DCIM_LCRecordLog – Lifecycle Log 126
This section describes the implementation for the DCIM_LCRecordLog class that represents the Lifecycle 127
log. The Lifecycle Log never overwrites its entries when it approaches the full capacity, the log is 128
archived into a partition on Lifecycle Controller. 129
DCIM_LCUseOfLog shall reference the DCIM_LCRecordLog class and the DCIM_ComputerSystem 130
class. 131
DCIM_LCElementCapabilities shall reference the DCIM_LCRecordLog class and the 132
DCIM_LCRecordLogCapabilities class. 133
DCIM_LCLogManagesRecord shall reference the DCIM_LCRecordLog class and the DCIM_LCLogEntry. 134
This class shall be instantiated in the Implementation Namespace. 135
7.1.1 Resource URIs 136
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-137
schema/2/DCIM_LCRecordLog?__cimnamespace=root/dcim” 138
The key property shall be the InstanceID. 139
The instance Resource URI for DCIM_LCRecordLog instance shall be: 140
“http://schemas.dell.com/wbem/wscim/1/cim-schema/2/DCIM_ 141
LCRecordLog?__cimnamespace=root/dcim+InstanceID=DCIM:LifeCycleLog” 142
7.1.2 Operations 143
The following table lists the implemented operations on DCIM_LCRecordLog. 144
Table 3 – DCIM_LCRecordLog - Operations 145
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
Invoke
Mandaotory
Instance URI (see section 8.2)
7.1.3 Class Properties 146
The following table lists the implemented properties for DCIM_LCRecordLog instance representing a 147
system in a system. The “Requirements” column shall denote whether the property is implemented (for 148
requirement definitions, see section 3). The “Additional Requirements” column shall denote either 149
possible values for the property, or requirements on the value formulation. 150