White Papers

Version 1.0.0 17
Table 9 – DCIM_SELRecordLog – Operations 214
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
Invoke
Mandatory
Instance URI (see section 8.1)
7.4.3 Class Properties 215
The following table lists the implemented properties for DCIM_SELRecordLog instance representing a 216
system in a system. The “Requirements” column shall denote whether the property is implemented (for 217
requirement definitions, see section 3). The “Additional Requirements” column shall denote either 218
possible values for the property, or requirements on the value formulation. 219
Table 10 – DCIM_SELRecordLog - Properties 220
Property Name Type Requirements Additional Requirements
InstanceID
String
Mandatory
The property value shall be "DCIM:SEL:1".
MaxNumberOfRecor
ds Uint64 Mandatory
The property shall have the value 512.
LogState Uint16 Mandatory
The property shall have the value 2 (Normal). The
successful instantiation of this class denotes that the
logging is fully functional.
OverwritePolicy Uint16 Mandatory
The property shall have the value 7 (Never
Overwrites), and the log may reject logging new
events.
RequestedState
Uint16
Mandatory
The property shall have the value 12 (Not Applicable).
EnabledState Uint16 Mandatory
The property shall have the value 2 (Enabled). The
logging is always enabled.
OperationalStatus[] Uint16 Mandatory
The property shall have the value 2 (OK). The
successful instantiation of this class denotes that the
logging is fully functional.
HealthState Uint16 Mandatory
The property shall have the value 5 (OK). The
successful instantiation of this class denotes that the
logging is fully functional.
ElementName
String
Mandatory
The property value shall be “System Event Log”.
CurrentNumberOfRe
cords Uint64 Mandatory
The property value shall represent the number of
records in the System Event Log.
7.5 DCIM_SELRecordLogCapabilities – SEL Record Log Capabilities 221
This section describes the implementation for the DCIM_SELRecordLogCapabilities class. 222
DCIM_SELElementCapabilities shall reference the DCIM_SELRecordLog class and the DCIM_ 223
SELRecordLogCapabilities class. 224
This class shall be instantiated in the Implementation Namespace. 225
7.5.1 Resource URIs 226
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-227
schema/2/DCIM_SELRecordLogCapabilities?__cimnamespace=root/dcim” 228
The key property shall be the InstanceID. 229