White Papers

Version 1.0.0 19
Property Name Type Requirement Additonal Requirement
PrimaryStatus
uint16
Mandatory
The property value shall be one of the following:
• 0(Unknown)
•
1(OK)
•
2(Degraded)
•
3 (Error)
RequestedState
uint16
Mandatory
The property value shall be 12 (Not Applicable)
SensorType
uint16
Mandatory
The property shall have one of the following
values:
• 1(Other)
•
2(Temperature)
•
3(Voltage)
•
4(Current)
•
5(Tachometer).
7.4 DCIM_RegisteredProfile - DMTF Sensors Profile Profile Registration 217
This section describes the implementation for the DCIM_RegisteredProfile class 218
This class shall be instantiated in the Interop Namespace. 219
The DCIM_ElementConformsToProfile shall be instantiate in both the Interop Namespace and 220
Implementation Namespace: root/dcim and shall reference the DCIM_RegisteredProfile instance. 221
7.4.1 Resource URIs for WinRM® 222
The class Resource URI shall be "http://schemas.dell.com/wbem/wscim/1/cim-223
schema/2/DCIM_RegisteredProfile?__cimnamespace=root/interop" 224
The instance Resource URI shall be: “http://schemas.dell.com/wbem/wscim/1/cim-225
schema/2/DCIM_LCRegisteredProfile?__cimnamespace=root/interop+InstanceID=
DMTF:Sensors:1.0.0” 226
The key property shall be the InstanceID property. 227
7.4.2 Operations 228
The following table lists the operations implemented on CIM_RegisteredProfile . 229
Table 11 – CIM_RegisteredProfile - Operations 230
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
7.4.3 DCIM_RegisteredProfile Properties 231
The following table lists the implemented properties for DCIM_RegisteredProfile instance. The 232
“Requirements” column shall denote whether the property is implemented (for requirement definitions, 233
see section 3). The “Additional Requirements” column shall denote either possible values for the property, 234
or requirements on the value formulation. 235
Table 12 – DCIM_RegisteredProfile 236
Property Name
Requirement
Type
Additional Requirements