White Papers

9 Version 1.0.0
7.4 DCIM_LCRegisteredProfile
One instance of DCIM_LCRegisteredProfile shall be instantiated.
7.5 Lifecycle Controller Attributes to be Represented by LC Management
Profile
The LC Management Profile defines the modeling of LC configuration attributes using the derivation of
CIM_BIOSAttribute class to represent each LC configuration attribute. The following are the LC
configuration areas that may require representation using this profile. Some areas are already
represented using other profiles, and will not need representation using the CIM_BIOSAttribute classes.
Each of the attributes represented by the derivation of the CIM_BIOSAttribute class may be modified
using SetAttribute() and SetAttributes() methods.
7.5.1 CCR (Component Configuration Recovery) Attributes:
Licensed
Part Firmware Update
Collect System Inventory on Restart
Table 2 – CCR Attributes
Attribute Name
Possible Values
Licensed
“Yes” = Licensed
“No” = Not Licensed
Part Firmware Update
Disable (default) = firmware update is not allowed
Allow version upgrade only = Allow firmware update only on up-revision
Match firmware of replaced part = Always update firmware
Collect System Inventory on
Restart
Disabled (default) = Disallow collecting inventory on restart
Enabled = Allow collecting system inventory on restart
7.5.2 Dell System ID
System ID
7.5.3 Discovery and Handshake Attributes:
Provisioning Server
Auto Discovery
Discovery Factory Defaults