White Papers

Version 1.2.0 25
7.1.5 Controller Battery View - DCIM_ControllerBatteryView 419
This section describes the implementation for the DCIM_ControllerBatteryView class. This class shall be 420
instantiated in the Implementation Namespace: root/dcim. 421
7.1.5.1 Resource URIs for WinRM
®
422
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-423
schema/2/DCIM_ControllerBatteryView?__cimnamespace=root/dcim” 424
The key property shall be the InstanceID. 425
The instance Resource URI for DCIM_ControllerBatteryView instance shall be: 426
“http://schemas.dell.com/wbem/wscim/1/cim-427
schema/2/DCIM_ControllerBatteryView?__cimnamespace=root/dcim+InstanceID=<FQDD>” 428
7.1.5.2 Operations 429
The following table lists the implemented operations on DCIM_ControllerBatteryView. 430
Table 11 – DCIM_ControllerBatteryView - Operations 431
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
7.1.5.3 Class Properties 432
The following table lists the implemented properties for DCIM_ControllerBatteryView instance 433
representing the RAID Controller Battery in a system. The “Requirements” column shall denote whether 434
the property is implemented (for requirement definitions, see section 3). The “Additional Requirements” 435
column shall denote either possible values for the property, or requirements on the value formulation. 436
Table 12 – DCIM_ControllerBatteryView - Properties 437
Property Name Requirement Type Additional Requirements
InstanceID Mandatory string
The property shall have the value
of the FQDD.
FQDD Mandatory string
The property shall represent Fully
Qualified Device Description
(FQDD)
PrimaryStatus Mandatory uint32
The property shall represent the
status of the device and shall be
one of the following values:
• 0 - Unknown
• 1 - OK
• 2 - Degraded
• 3 - Error
RAIDState Mandatory Uint16
The property shall represent the
status of battery and shall be one
of the following values:
• 0 - Unknown
• 1 - Ready
• 6 - Failed