White Papers

50 Version 1.2.0
758
Table 49 – DCIM_RAIDService.CheckVDValues() Method: 759
VDPropNameArrayOut
values
Description
SizeInBytes
If Input Parameter “Size” is not specified or is specified as zero, then
“SizeInBytes” returns the maximum allowed size of the virtual disk. If the
input parameter “Size” is non-zero, SizeInBytes is same as Size.
RAIDLevel
See RAIDLevel Values and ValueMaps from DCIM_VirtualDiskView
MOF.
SpanDepth Number of spans in virtual disk.
SpanLength Number of disks per span.
StripeSize See DCIM_VirtualDiskView class (see section 7.1.3).
ReadPolicy See DCIM_VirtualDiskView class (see section 7.1.3).
WritePolicy See DCIM_VirtualDiskView class (see section 7.1.3).
DiskCachePolicy See DCIM_VirtualDiskView class (see section 7.1.3).
Name Virtual disk name.
StartingLBA Starting logical Block address in 512 byte blocks of the virtual disk.
760
Table 50 – DCIM_RAIDService.CheckVDValues() Method: Return Code Values 761
Value Description
0 Request was successfully executed.
2 Error occurred
Table 51 –DCIM_RAIDService.CheckVDValues() Method: Standard Messages 762
MessageID (OUT
parameter) Message
STOR003 Missing parameter
STOR004 Invalid parameter value
STOR006 General failure
STOR007 Resource Allocation Failure
STOR010 RAID level not supported on controller
STOR011 Stripe size not supported on controller
STOR009 Physical disk FQDD did not identify a valid physical disk for the operation
STOR013
One or more Storage device(s) not in a state where the operation can be
completed
STOR017 Virtual Disk provided is not valid for the operation
StartingLBA
Starting logical block address of virtual disks in 512 byte
blocks. If input value is 0xFFFFFFFFFFFFFFFF or
18446744073709551615, startingLBA is calculated
programmatically.