White Papers

64 Version 1.2.0
Qualifiers Name Type Description/Values
OUT RebootRequired Uint8 This parameter shall indicate if reboot is required to
set the value and shall be one of the following
values:
• 0 – No
•
1 – Yes
OUT MessageID[] String
Error MessageID is returned If the method fails to
execute.
OUT Message[] String
Error Message in English corresponding to
MessageID is returned If the method fails to
execute.
OUT MessageArguments[] String Substitution variables for dynamic error messages
9 Use Cases 881
See Lifecycle Controller (LC) Integration Best Practices Guide. 882
10 CIM Elements 883
No additional details specified. 884
11 Privilege and License Requirement 885
The following table lists the privilege and license requirements for the listed operations. For the detailed 886
explanation of the privileges and licenses, refer to the Dell WSMAN Licenses and Privileges specification. 887
Table 89 – Privilege and License Requirements 888
Class and Method Operation
User
Privilege
Required
License Required
DCIM_ControllerView
ENUMERATE, GET
Login
LM_REMOTE_ASSET_INVENTORY
DCIM_EnclosureView
ENUMERATE, GET
Login
LM_REMOTE_ASSET_INVENTORY
DCIM_PhysicalDiskView
ENUMERATE, GET Login LM_REMOTE_ASSET_INVENTORY
DCIM_VirtualDiskView
ENUMERATE, GET
Login
LM_REMOTE_ASSET_INVENTORY
DCIM_RAIDInteger
ENUMERATE, GET
Login
LM_REMOTE_CONFIGURATION
DCIM_RAIDString
ENUMERATE, GET
Login
LM_REMOTE_CONFIGURATION
DCIM_RAIDEnumeration
ENUMERATE, GET Login LM_REMOTE_CONFIGURATION
DCIM_ControllerBatteryView
ENUMERATE, GET
Login
LM_REMOTE_ASSET_INVENTORY
DCIM_EnclosureEMMView
ENUMERATE, GET
Login
LM_REMOTE_ASSET_INVENTORY
DCIM_EnclosureFanSensor
ENUMERATE, GET
Login
LM_REMOTE_ASSET_INVENTORY
DCIM_EnclosurePSUView
ENUMERATE, GET Login LM_REMOTE_ASSET_INVENTORY
DCIM_EnclosureTemperatureSensor
ENUMERATE, GET
Login
LM_REMOTE_ASSET_INVENTORY
DCIM_RAIDService
ENUMERATE, GET
Login
NONE
DCIM_RAIDService.
CreateTargetedConfigJob()
INVOKE
Login,
System
Control
LM_REMOTE_CONFIGURATION
DCIM_RAIDService.
DeletePendingConfiguration()
INVOKE
Login,
System
Control
LM_REMOTE_CONFIGURATION
DCIM_RAIDService.ResetConfig()
INVOKE
Login,
LM_REMOTE_CONFIGURATION