White Papers
Table Of Contents
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Symbols and Abbreviated Terms
- 5 Synopsis
- 6 Description
- 7 Implementation Description
- 7.1 DCIM_SystemView – System View
- 7.2 DCIM_SystemEnumeration – System Enumeration Attributes
- 7.3 DCIM_SystemString – System String Attributes
- 7.4 DCIM_SystemInteger – System Integer Attributes
- 7.5 System Attributes
- 7.6 DCIM_SystemManagementService – System Management Service
- 7.7 System Info Profile Profile Registration
- 8 Methods
- 8.1 DCIM_SystemManagementService.SetAttribute()
- 8.2 DCIM_SystemManagementService.SetAttributes()
- 8.3 DCIM_SystemManagementService.CreateTargetedConfigJob()
- 8.4 DCIM_SystemManagementService.DeletePendingConfiguration()
- 8.5 DCIM_SystemManagementService.ShowErrorsOnLCD()
- 8.6 DCIM_SystemManagementService.IdentifyChassis()
- 9 Use Cases
- 10 CIM Elements
- 11 Privilege and License Requirement
22 Version 1.2.0
Table 10 – Class: DCIM_SystemInteger 340
Properties Requirement Type Additional Requirements
InstanceID Mandatory String
The property value shall be formed as follows:
“System.Embedded.1#<GroupID>#<AttributeName>”.
AttributeName Mandatory String
The property value shall be from the “AttributeName”
column in Error! Reference source not found.,
Table 13,
and Table 15.
AttributeDisplayName Mandatory String
The property value shall be from the
“AttributeDisplayName” column in Error! Reference
source not found., Table 13, and Table 15.
GroupID Mandatory String See section 7.5.1 and 0.
GroupDisplayName Mandatory String See section 7.5.1 and 0.
CurrentValue[] Mandatory String
The property value shall represent the current value of the
attribute.
DefaultValue[] Mandatory String
The property value shall represent the default value of the
attribute.
PendingValue[] Mandatory String
The property value shall represent the pending value of the
attribute. If the property value is NULL, then the attribute
has no pending value.
IsReadOnly Mandatory Boolean
The property value shall be from the “IsReadOnly” column
in Error! Reference source not found.,
Table 13, and
Table 15.
FQDD Mandatory String
The property shall be set to “System.Embedded.1”.
DisplayOrder Optional uint16
The property shall represent the sequence number
denoting the preferred placement of the attribute in the list
of all system attributes.
Dependency Optional String
LowerBound Mandatory sint64
The property value shall be from the “LowerBound” column
in Error! Reference source not found.,
Table 13, and
Table 15..
UpperBound Mandatory uint64
The property value shall be from the “UpperBound” column
in Error! Reference source not found.,
Table 13, and
Table 15..
7.5 System Attributes 341
This section lists and describes the attributes and their logical grouping. 342
7.5.1 Server Power Attributes 343
This section describes the attributes for managing system’s power. The attributes are used to set power 344
cap and thresholds , manage power allocation, and redundancy settings. 345
The GroupID property for the DCIM_SystemEnumeration, DCIM_SystemString, and 346
DCIM_SystemInteger shall be “ServerPwr.1”. 347
The GroupDisplayName property for the DCIM_SystemEnumeration, DCIM_SystemString, and 348
DCIM_SystemInteger shall be “Server Power”. 349
The following table lists the values for the DCIM_SystemEnumeration of this group. Each of the column 350
headings correspond to a property name on the DCIM_SystemEnumeration class. The Description 351
column contains the description for each of the attribute. Each row contain the values for the properties 352