White Papers
Table Of Contents
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Symbols and Abbreviated Terms
- 5 Synopsis
- 6 Description
- 7 Implementation Description
- 7.1 DCIM_SystemView – System View
- 7.2 DCIM_SystemEnumeration – System Enumeration Attributes
- 7.3 DCIM_SystemString – System String Attributes
- 7.4 DCIM_SystemInteger – System Integer Attributes
- 7.5 System Attributes
- 7.6 DCIM_SystemManagementService – System Management Service
- 7.7 System Info Profile Profile Registration
- 8 Methods
- 8.1 DCIM_SystemManagementService.SetAttribute()
- 8.2 DCIM_SystemManagementService.SetAttributes()
- 8.3 DCIM_SystemManagementService.CreateTargetedConfigJob()
- 8.4 DCIM_SystemManagementService.DeletePendingConfiguration()
- 8.5 DCIM_SystemManagementService.ShowErrorsOnLCD()
- 8.6 DCIM_SystemManagementService.IdentifyChassis()
- 9 Use Cases
- 10 CIM Elements
- 11 Privilege and License Requirement
36 Version 1.2.0
Table 36 – IdentifyChassis() Method: Return Code Values 534
Value Description
0 Completed with no error
2 Failed
Table 37 – IdentifyChassis() Method: Parameters 535
Qualifiers Name Type Description/Values
IN, REQ IdentifyState Uint8
The parameter shall represent the desired
state of the LED on the platform to identify
it:
• 0 - "Disabled" (LED is off)
• 1 - "Enabled" (LED is on)
• 2 - "Time Limited Enabled" (LED is on
for a limited time)
IN DurationLimit Uint8
The parameter shall be specified in the
seconds. The parameter shall be specified
if the IdentityState has a value 2 (
Time
Limited Enabled)
OUT MessageID String
Error Message ID may be used to look-up in
the Dell Message registry files. For more
information, see Error Message Registry.
OUT Message String Error Message
OUT MessageArguments[] String Error MessageArguments
536
Table 38 – IdentifyChassis() Method: Standard Messages 537
MessageID (OUT parameter) Message MessageArguments[]
SYS001 The command was succesful
SYS002 The command failed
SYS003 Missing parameter(s) <parameter> Show
SYS004
Invalid parameter value for
<parameter>
Show
SYS011
Configuration already committed,
cannot set configuration
SYS012
User is not authorized to perform
this operation
SYS019
Required dependancy input not
found
538
9 Use Cases 539
See Lifecycle Controller (LC) Integration Best Practices Guide. 540