White Papers

133 Lifecycle Controller Integration Best Practices Guide
24 Base Server and Physical Asset Profile Use Cases
24.1 Discovery of Base Server and Physical Asset Profile Support
There is not an LC registered Base Server and Physical Asset Profile prior to LC2.0.
Use the following procedure below to confirm the existence of the Base Server and Physical Asset profile support in
LC2.0+.
Applies to: LC2+
Prerequisites for script: none
Script: GetBaseServerAndPhysicalAssetProfile.win
A) The Lifecycle Controller remote service must be in a “ready” state before running any other WSMAN commands.
GetRemoteServicesAPIStatus():
B) GetLCRegisteredProfiles(): ENUMERATE the DCIM_LCRegisteredProfile class to view all registered profiles. See
section 2.2 for a definition of ENUMERATE.
C) Search for “RegisteredName= Base Server and Physical Asset” and note its instanceID to use in step D)
D) GetLCRegisteredProfile(): GET the DCIM_LCRegisteredProfile instance using the InstanceID from C). See Section
2.3 for a definition of GET.
Results for the InstanceID of DCIM:BaseServerandPhysicalAsset:1.0.0 shown below. If no instance is returned, the
profile is not supported.
DCIM_LCRegisteredProfile
AdvertiseTypeDescriptions = WS-Identify
AdvertiseTypeDescriptions = Interop Namespace
AdvertiseTypes = 1
AdvertiseTypes = 1
InstanceID = DCIM:BaseServerandPhysicalAsset:1.0.0
OtherRegisteredOrganization = DCIM
ProfileRequireLicense
ProfileRequireLicenseStatus
RegisteredName = Base Server and Physical Asset