White Papers

147 Lifecycle Controller Integration Best Practices Guide
DCIM_LCRegisteredProfile
AdvertiseTypeDescriptions = WS-Identify
AdvertiseTypeDescriptions = Interop Namespace
AdvertiseTypes = 1
AdvertiseTypes = 1
InstanceID = DCIM:SoftwareInventory:1.0.0
OtherRegisteredOrganization = DCIM
ProfileRequireLicense = Remote Inventory
ProfileRequireLicenseStatus = LICENSED
RegisteredName = Software Inventory
RegisteredOrganization = 1
RegisteredVersion = 1.1.0
29.3 Inventory of Software in System
Use the following procedure below to list the inventory of all software in the system.
Applies to: LC1.4.0+
Prerequisites for script: none
Script: GetSoftwareInventoryViews.win
A) The Lifecycle Controller remote service must be in a “ready” state before running any other WSMAN commands.
The GetRSStatus() method or the GetRemoteServicesAPIStatus() method may be used depending on the version of the
LC Management registered profile.
B) GetSoftwareIdentities(): ENUMERATE the DCIM_SoftwareIdentity class to view all instances. See section 2.2 for
a definition of ENUMERATE.
The instance information of all available software will be returned.
29.4 Get the Installed BIOS Firmware Inventory
Use the following procedure to get the BIOS installed software instance. The URI for getting particular instance
information is deterministic (i.e the InstanceID will be unique for each instance).
Applies to: LC1.4.0+