White Papers

90 Lifecycle Controller Integration Best Practices Guide
Applies to: LC1.5.0+
Prerequisites for script: none
Script: GetFanViews.win
A) The Lifecycle Controller remote service must be in a “ready” state before running any other WSMAN commands.
The GetRSStatus() method or the GetRemoteServicesAPIStatus() method may be used depending on the version of the
LC Management registered profile.
B) GetFanViews(): ENUMERATE the DCIM_FanView class to view all instances. See section 2.2 for a definition of
ENUMERATE.
The instance information of all available fans will be returned.
10.3 Get Information About the First Fan
Use the following procedure to get a single fan instance. The URI for getting particular instance information is
deterministic (i.e the InstanceID will be unique for each instance).
Applies to: LC1.5.0+
Prerequisites for script: Set desired instanceID by editing script
Script: GetFanView.win
A) The Lifecycle Controller remote service must be in a “ready” state before running any other WSMAN commands.
The GetRSStatus() method or the GetRemoteServicesAPIStatus() method may be used depending on the version of the
LC Management registered profile.
B) GetCPUView(): GET the DCIM_FanView instance using the InstanceID=Fan.embedded.1. See Section 2.3 for a
definition of GET.
The instance of DCIM_FanView that contains the information on the first fan will be returned.