White Papers
Table Of Contents
- 1 Introduction
- 2 Integrate iDRAC with Microsoft’s Active Directory
- 3 Configure iDRAC Single Sign-On
- A Configure Active Directory using RACADM
Configure iDRAC to use Active Directory Authentication
11
Figure 9: Standard Schema Role Groups
2.5.3 Testing Standard Schema
Use the test feature in iDRAC to validate the Active Directory configuration. Go to iDRAC Settings > Users >
Directory Services, click Test Settings.
Enter username of user in iDRACAdministrator group along with password.
Figure 10: Test Admin User
All tests must pass (including certificate validation) or be marked Not Applicable/Not Configured. The Test
Log at the bottom of the page should be error-free and list all 9 privileges in the cumulative privilege gained
section.