Developers Guide

17 Dell EMC SC Series and Active Directory Integration | CML1135
3.1.4 SC Series network settings
On the SC Series array, each controller’s primary DNS server must be set to the primary DNS server used by
Active Directory. If a secondary DNS server also exists, configure each controller to point to it. Each controller
must also reflect the domain name where the SC Series array will exist and authenticate with. To modify the
DNS/domain settings of the controller, perform the following steps:
1. Using the DSM client, connect directly to the SC Series array or to a DSM Data Collector that has the
SC Series array added. If connected to a DSM Data Collector, select the SC Series array to manage.
2. Select the Hardware tab, and expand Controllers.
3. Right-click the first controller and select Edit Settings.
4. In the DNS Information section, enter the IP address of the primary DNS Server, the Secondary
DNS Server (if applicable), and the Domain Name. Click OK when finished.
5. For a dual-controller SC Series array, repeat this process on the other controller.