Owners Manual

EqualLogic FS7500 Controller Hardware Maintenance Installing System Components
2–3
Figure 2-1: Using an Electrostatic Wrist Strap
2 Fit the band closely around your wrist.
3 Connect the banana plug to ground, or attach the plug to the alligator clip and connect the clip
to a grounded device such as an ESD mat or the metal frame of a grounded piece of
equipment.
Removing and Reinstalling the Controller Bezel
Removing the Controller Bezel
To remove the FS7500 Controller bezel, see Figure 2-2 and follow these steps:
1. Use the key to unlock the bezel, if it is locked.
2. Push up on the release latch on the left side of the bezel and carefully pull out the bezel from
the left side of the controller.
3. Holding the bezel, move it to the left to disengage the bezel from the right side of the
controller.